For YUWELL M6031-0 MEDIANA M6031-0 HeartOn A10 MEDIANA A10
When to Replace the Battery and Defibrillation Pads
The battery lifetime in use can be up to 10 hours monitoring or 200 shocks or a combination of both. The defibrillation pads in the stand by mode (inserted into the AED) have a shelf-life indicated by the expiration date (typically 2 years from manufacture). Replacement of the battery and defibrillation pads must be carried out if:
The expiry date of the battery & defibrillation pads has been exceeded.
When the defibrillation pads have been used (it is a single use item) it must be replaced with a new defibrillation pads.
If the battery status indicator is flashing one bar, you may need to replace the fresh battery.
For diagnosis of the reason for status indicator display ??X?? please refer to the troubleshooting section of this manual.
How to Replace the Battery and Defibrillation Pads
1. Take the replacement defibrillation pads from its protective bag.
2. Remove the old defibrillation pads which are to be replaced.
3. Push the defibrillation pads firmly to ensure it is fully inserted.
4. Turn on.
5. Check status indicator. If the battery and defibrillation pads have been inserted correctly, Status Indicator displays??"O?? after approximately 6 seconds.
6. If necessary inform relevant safety officer or person responsible for maintenance of the AED.
7. Update the relevant records to show the date that the replacement the battery and defibrillation pads was placed into service.
8. Dispose of the old battery and defibrillation pads.